With the new INVOS™ regional oximetry strategic partner solution, adding noninvasive brain oxygenation and tissue perfusion patient monitoring to your portfolio is easy and efficient.
The new INVOS™ regional oximetry strategic partner solution is the first external fully-featured NIRS-based cerebral/somatic oximetry available for OEM integration.
Clinicians are increasingly adopting regional saturation monitoring for the early detection of cerebral hypoxia([FOOTNOTE=Vretzakis G, Georgopoulou S, Stamoulis K, et al. Cerebral oximetry in cardiac anesthesia. J Thorac Dis. 2014;6 Suppl 1:S60-69.],[ANCHOR=],[LINK=]) and to monitor changes in perfusion in neonates and infants. By integrating INVOS™ technology you can offer your customers the unique benefits of market-leading INVOS™ technology.
|The following information is provided to the patient monitor by the INVOS™ regional oximetry strategic partner solution, per channel:|
|Regional saturation (rSO2 )||15 to 95|
|Baseline (BL)||15 to 95|
|Total average (six-minute average (rSO2 )||15 to 95|
|Signal strength indicator||0 to 5|
|% change from the baseline (% ↑↓ (rSO2)||-85 to 535%|
|Area under the curve (AUC)||0 to 99,999|
|Physical Connection – Connector/Receptacle|
|(Part of INVOS™ monitor interface cable) Manufacturer P/N: HG2P14GY1204MRH, 12-pin barrel-style connector, yellow-colored strain relief, includes visual and mating keys|
|(Recommended mating receptacle of host monitor/system) Manufacturer P/N: HG2 [E|C] 1 [0|1|4|5|6] GY1204FRANH|
|[E|C] Host designer to specify||E = receptacle/panel|
|C = receptacle/cable|
|[0|1|4|5|6] Host designer to specify||0-6 defines strain relief inner diameter options to accommodate outer diameter of OEM chosen cable (0 required for panel-mount receptacle)|
|HyperGrip® connectors and receptacles are Hypertac-brand products owned by Smiths Group. HyperGrip® P/Ns and product offering are subject to change.|
|Input Power Requirements|
|The INVOS™ regional oximetry strategic partner solution adheres to the power requirements of the USB 2.0 spec|
|Voltage Input||+5VDC +/- 5%|
|Max Current Draw||500 mA|
|Supply Voltage Ripple||<100 mV at all frequencies|
|Rate||9,600 or 57,600 baud (selectable via select line)|
The INVOS™ regional oximetry strategic partner solution communicates with the host monitor through asynchronous serial communication (RS-232). The protocol is packet-oriented with binary data and ACK/NAK handshaking. Beyond the regular reporting to the host of the INVOS™ output parameters, in the data exchange the host can:
®* is a registered trademark of its respective owner.
|Operating||16 to 32° C (60 to 90° F)|
|Storage||-20 to 70°C (-40 to 158°F)|
|Operating||20 to 80% RH, noncondensing|
|Storage||10 to 95% RH, noncondensing|
|Operating||0 to 3,048 m (0 to 10,000 ft)|
|Storage||-500 to 4,600 m (-1,640 to 15,092 ft)|
The INVOS™ regional oximetry strategic partner solution, a component to be integrated into and be part of an OEM partner’s system, has been designed to comply with the electrical safety requirements of IEC 60601-1 (both second and third editions). Compliance of the component was tested and proven by a third-party accredited test facility while integrated into a Medtronic-designed representative system. The test report may be obtained from Medtronic upon partner request.
The preamplifier of the INVOS™ regional oximetry strategic partner solution provides the required degree of patient isolation for a type BF applied part.
Compliance of the OEM partner’s system, including the integrated INVOS™ regional oximetry strategic partner solution, is the responsibility of the system provider.