System Components
The iPro™ Continuous Glucose Monitor works with the Sof-sensor® and Solutions® Software.
Sof-sensor
How It Works
The tiny glucose sensor is inserted, virtually painlessly, under the skin using an easy-to-use auto-insertion device.*
About the Glucose Sensor
- Measures current glucose levels continuously
- Proven accuracy in numerous studies1-3
- Fingersticks are required to calibrate the glucose sensor and before making treatment decisions†
- Waterproof when attached to the MiniLink® Transmitter
- FDA approved for 3 days of continuous use
* If sensor is not securely placed in Sen-serter prior to insertion, pain or minor injury may occur.
† The sensor should be checked periodically to ensure that it remains in place. If the sensor is disconnected and then reconnected, the signals it sends to the monitor may not be stable or accurate. The sensor may need to be recalibrated (See section titled "Perform the Initial Calibration" in the product manual) before returning to normal operation.
References
- Steil GM, Bernaba B, Saad M, et al. Accurate determination of plasma glucose during hyper-and hypoglycemia with a subcutaneous glucose sensor. Diabetes. 2000;49(suppl 1):510.
- Gross TM, Mastrototaro JJ. Efficacy and reliability of the continuous glucose monitoring system. Diabetes Tech Ther. 2000;2(Suppl 1):S19-S26.
- Caplin NJ, O'Leary P, Bulsara M, et al. Subutaneous glucose sensor values closely parallel blood glucose during insulin-induced hypoglycemia. Diabet Med. 2003;20:238-241.
Solutions Software
The Solutions® Software for CGMS® iPro™ Continuous Glucose Recorder (MMT-7319) is designed to extract glucose data from the CGMS iPro Digital Recorder (MMT-7709) using the ComLink™ iPro (MMT-7304NPRO or MMT-7304WPRO) connected to your PC.
The software is installed on your PC and downloads glucose data from the iPro Recorder into patient data files on the PC. The User Guide provides information about the ComLink iPro and explains how to install and use the Solutions Software for CGMS iPro Continuous Glucose Recorder.
Software Compatibility
The Solutions CGMS iPro (MMT-7319) has been validated to coexist on a PC with the following versions of the Solutions Software:
- MMT-7310 version 3.0
- MMT-7311 version 7.0
- MMT-7330 version 3.0
- MMT-7335 version 1.0
Supported Devices and Hardware
Supported Meters
- Paradigm® Link® meter
- LifeScan OneTouch® Ultra®, LifeScan OneTouch® Ultra®2, LifeScan OneTouch® UltraLink® meter
- FreeStyle Flash® meter
Supported Communications Devices
- MMT-7310 version 3.0
- MMT-7311 version 7.0
- MMT-7330 version 3.0
- MMT-7335 version 1.0
- CGMS iPro Digital Recorder
- ComLink iPro