Follow These Steps to Program MRI SureScan to On

  1. Select the Params icon from the tool palette.
  2. Select Additional Features on the Parameters screen.
  3. Select the MRI SureScanfield (see Figure 1). The MRI SureScan Checklist appears.

    4. Figure 1. Selecting the MRI SureScan... field

    Figure 4
  4. Select the check box in the upper-left corner if all items on the MRI SureScan Checklist are satisfied for the patient (see Figure 2).

    5. Note: Print the MRI SureScan Checklist if desired.

    Figure 2. MRI SureScan Checklist

    Figure 5
  5. Select [OK]. The MRI SureScan window appears.
  6. Program MRI SureScan to On.
  7. Select an appropriate MRI SureScan pacing mode and MRI SureScan pacing rate (see Figure 3).
    • For patients who require pacing support, program the device to an asynchronous pacing mode (DOO, AOO, VOO)

      • Note: An MRI SureScan pacing rate must be selected for these pacing modes to avoid competitive pacing during the operation of MRI SureScan.

    • For patients who do not require pacing support, program the device to the non-pacing mode (ODO)

      • Note: An MRI SureScan pacing rate is not necessary for patients whose device is programmed to ODO.

    Figure 3. Selecting MRI SureScan Settings

    Figure 6
  8. Select [PROGRAM].

    9. Note: After the device has been programmed for an MRI scan, available options are
    [Print], [End Session], and [Emergency].
    MRI SureScan can also be programmed to Off.

    Note: The status of MRI SureScan and the programmed parameters may be confirmed by printing the MRI SureScan parameter screen.


The device is now ready for the MRI scan.