Medtronic
 
 

Medtronic Programmers

Medtronic CareLink® Programmer Specifications

   
Wireless Telemetry

Programmer enabled with Conexus™ Wireless Telemetry using the MICS (Medical Implant Communications Service) radio frequency band.

Features SmartRadio™ Technology, which automatically searches for the clearest MICS channel available.

Telemetry Range : Two to five meters in typical operating suite or follow-up environment. Longer distances may be achieved depending on local conditions.

Power Requirement  
Voltage 100 to 127 VAC nominal or 200 to 240 VAC nominal
Frequency 50/60 Hz nominal
Printer  
Resolution 600 dots/25 mm horizontally for waveform traces at print speeds through 25 mm/sec, 400 dots/25 mm at 50 mm/sec; 200 dots/25 mm vertically
Paper Type 110 mm wide, Thermal, Medtronic No. 6092
Waveform Recording Speeds 12.5,25 or 50 mm/s.
ECG Specifications  
Defibrillation Protection IEC 60601-2-27 and AAMI-EC11
Input Impedance at DC >2.5 Meg Ohms at 10 Hz
ECG Range of Linear Operation –5 mV to +5 mV
ECG Total Signal Error <10%
Pacing Pulse Width >100 µ to 2 ms
Temperature Limits  
Operating 48.9 degrees F to 95 degrees F
(9.4 degrees C to 35 degrees C)
Storing –7.6 degrees F to 140 degrees F
(–22 degrees C to 60 degrees C)
Modem  
Command Set Hayes and Microcom compatible AT commands
Data Interface PCMCIA Release 2.1 compliant, 68-pin connector
Analog Interface RJ-11 modular telephone connector
DTE Speeds 1200, 2400, 4800, 7200, 9600, 14400, 19200, 37400, 57600, 115200 bps
Other  
Screen Size 15 inches

Additional Information

  • Conexus
  • Concerto CRT
  • Virtuoso ICD
  • CareLink® Programmer Specifications
  • Program all Medtronic Cardiac Devices
  • Medtronic Connect
    Visit Medtronic Connect
    for the latest in online presentation tools and in-depth information
  • Contact Medtronic Physician Services