In the next several minutes, I'll show
you how to use your new MyCareLink Smart Patient Monitor and send your
first transmission. In this video, we use an Android device. The steps are
very similar when using an Apple device. So let's get started. The my CareLink Smart Monitor consists
of a reader that is battery powered and a free app that's designed to work with
your Android or Apple smartphone or tablet. The first step is to insert three
AA batteries into the reader. Make sure Bluetooth is turned on within
your smartphone or tablet settings. Now launch your browser.
Go to MyCareLinkSmart.com and tap download. Depending on what type of
smartphone or tablet you're using, the download button, will send you to either the
Apple app store or the Android, Google play store for app installation. Follow the installation
prompts within the app store. Consult the user's guide for
your smartphone or tablet. If you need general information
on how to download an app. Once you've downloaded the app
to your smartphone or tablet, you'll open it and follow the prompts. Please accept the terms and
conditions in order to proceed. Now press the green
arrow button to continue. The app will prompt you to turn the reader
on by pressing the gray button on the reader. Next, locate the numeric code on the back of
your reader and enter the number into the app using the app key pad. This is the action that enables your
reader to work with your smartphone or tablet. The app will prompt you to use Bluetooth
to pair your reader to your smartphone or tablet. Tap okay on the screen to accept
the Bluetooth pairing request. With that, your reader
is ready for use. Now, place the reader over your heart device.
While holding the reader over your device the reader will display
a green light and the app will display a green progress bar that
lets you know the reader is positioned correctly and receiving
information from your device. When the reading is complete, you'll be prompted on the app
to set the reader down. The app will indicate that your information
is being sent followed by a check mark confirming that the
transmission is complete. Tap the home icon to go
back to the home screen, which now shows the date of
your most recent transmission. At this point, you can exit the app. You don't need to send information
again until instructed by your doctor or clinic. There's not an
off button on the reader. It will turn itself off automatically
so there's no need to push additional buttons. The reader will turn itself off when
not in use for two or more minutes. That's all there is to it. Just follow the prompts on your app
whenever you need to send information as instructed by your doctor or clinic. Please note that software updates are
required for your reader on occasion. The updates will happen
automatically upon opening the app. The following screen will appear. Please leave your smartphone or tablet
near your reader until the software update is complete. If you have questions
that were not answered in this video, you can find help in the materials that
came with your reader or at the website shown on the screen or by calling
the number shown below it. If you need to review these steps,
just replay the video and watch again.