- [Instructor] This video will demonstrate how to connect the MyCareLink Relay home communicator to a Wi-Fi network, using a Windows PC. Please watch the entire video before beginning. You can also follow along in the patient manual, which includes step by step instructions. If you need assistance with any of these steps, please call CareLink Patient Services at 1-800-929-4043. Step one, plug in the MyCareLink Relay. If it was already plugged in, unplug it and plug it in again. Step two, turn on your computer. Then, open the list of available Wi-Fi networks. Step three, select the "Medtronic-xxx" network. The X-X-X will be replaced with the last three digits of your communicator's serial number. Click connect. Step four, enter the password from the bottom label of the communicator. Then, click 'OK'. Step five, open an internet browser, such as Google Chrome or Internet Explorer and type, http://www.MCLRelayWifi.com in the address field. And press enter. Please be sure to include http://, when typing the website address. Step six, select your language and click 'GET STARTED'. Step seven, select your own Wi-Fi network from the list provided and click 'CONTINUE'. Step eight, enter your own Wi-Fi network password and click continue. Step nine, the screen will indicate that the communicator is connected. You may close the browser and connect your computer back to your home network. Additional trouble shooting information for Wi-Fi setup can be found in the MyCareLink Relay home communicator manual.