Traditionally, one calibration curve or a limited set of curves is programmed within the monitor. With OxiMax™ technology, the calibration curve is in the sensor, giving clinicians the ability to take advantage of new sensor designs without always upgrading the monitor.
Founded on three basic principles:
These principles guide the design of our Nellcor™ pulse oximetry with OxiMax™ technology, which provides clinical performance that helps ensure appropriate oxygenation throughout the cardiorespiratory cycle - even in such difficult monitoring conditions as low perfusion and signal interference, including patient motion([FOOTNOTE=Covidien FDA 510(k) K123581.],[ANCHOR=],[LINK=]),([FOOTNOTE=Covidien FDA 510(k) K012891.],[ANCHOR=],[LINK=]).
|Order Code||Description||Unit of Measure||Quantity|
|A||Nellcor™ Single-Patient-Use Two-Piece SpO2 Sensors, Adult >30 kg||Case||24|
|N||Nellcor™ Single-Patient-Use Two-Piece SpO2 Sensors, Neonatal/Adult <3 kg or >40 kg||Case||24|
|I||Nellcor™ Single-Patient-Use Two-Piece SpO2 Sensors, Infant 3-20 kg||Case||24|
|P||Nellcor™ Single-Patient-Use Two-Piece SpO2 Sensors, Pediatric 10-50 kg||Case||24|
|OC-3||Nellcor™ Single-Patient-Use Two-Piece SpO2 Sensors, Sensor Cable 3’||Box||1|
|Two-piece SpO2 sensors|
|Single-patient-use adhesive bandage|
|Adult: >30 kg|
|Neonatal/Adult: <3 kg or >40 kg|
|Infant: 3 – 20 kg|
|Pediatric: 10 – 50 kg|
|Sensor cable: 3 ft.|
Patients have a wide range of conditions. To stay ahead of potential complications, clinicians need accurate, reliable continuous monitoring devices to help them ensure appropriate oxygen delivery throughout the cardiorespiratory cycle. Nellcor™ sensors with OxiMax™ technology meet this need.
From the NICU and ICU to the OR and general care floor, Nellcor™ pulse oximeters with OxiMax™ technology use cardiac-based signal processing and alarm management technologies to deliver accurate, reliable SpO2 and pulse rate readings.1
With our continuous pulse oximetry, clinicians can: