Tri-Staple™ 2.0 Reinforced Reload

More than 2 million firings — and counting([FOOTNOTE=Based on analysis of internal Cognos monitoring from 2014 through April 2020. May 2, 2020.],[ANCHOR=],[LINK=])

Tri-Staple™ reinforced reloads are the only endoscopic staplers with preloaded tissue reinforcement for improved ease of use and less waste in the OR.^1,†,‡ That convenience comes with the confidence of Tri-Staple™ technology and stronger reinforcement than Seamguard™*.^2,§,Ω Plus, it may: 

• Save an average of 7 to 10 minutes of OR time per procedure^1,†,‡
• Reduce operating time and acute bleeding at the staple line in sleeve gastrectomies([FOOTNOTE=El Moussaoui I, Limbga A, Mehdi A. Staple line reinforcement during sleeve gastrectomy with a new type of reinforced stapler. Minerva Chir. 2018;73(2):127–132.],[ANCHOR=],[LINK=])^{,††,‡‡}
• Significantly reduce the likelihood of air leaks in pulmonary lobectomies([FOOTNOTE=Deguchi H, Tomoyasu M, Shigeeda W, Kaneko Y, Kanno H, Saito H. Reduction of air leakage using linear staple device with bioabsorbable polyglycolic acid felt for pulmonary lobectomy. Gen Thorac Cardiovasc Surg. 2020;68(3):266–272.],[ANCHOR=],[LINK=])^,§§

Intelligence enabled

The Tri-Staple™ 2.0 reinforced reload is compatible with all Medtronic handles. When paired with the smart Signia™ stapler, it delivers:

• More consistent staple formation by adjusting firing speeds when stapling in across different tissue properties([FOOTNOTE=Based on internal report #RE00218740, Signia™ stapling adaptive firing technology data calculations and references. Aug. 7, 2019.],[ANCHOR=],[LINK=])^,([FOOTNOTE=Based on internal test report #RE00147607, 4.5 mm round staple pull-apart analysis report. 2018.],[ANCHOR=],[LINK=])^{,ΩΩ,†††}
• A reduction in malformed staples by up to 84% in different tissue thicknesses compared to manual and fixed-speed powered staplers^6,([FOOTNOTE=Based on internal test report #R2146-173-0, ASA verification testing with slow speed force limit evaluation. 2015.],[ANCHOR=],[LINK=])^,([FOOTNOTE=Based on internal test report #R2146-151-0, Powered stapling firing speed DOE analysis and ASA parameters. 2015.],[ANCHOR=],[LINK=])^,ΩΩ