Healthcare Professionals
Affinity™ CP
Centrifugal Blood Pump
You just clicked a link to go to another website. If you continue, you may go to a site run by someone else.
We do not review or control the content on non-Medtronic sites, and we are not responsible for any business dealings or transactions you have there. Your use of the other site is subject to the terms of use and privacy statement on that site.
It is possible that some of the products on the other site are not approved in your region or country.
Your browser is out of date
With an updated browser, you will have a better Medtronic website experience. Update my browser now.
The content of this website is exclusively reserved for Healthcare Professionals in countries with applicable health authority product registrations.
Click “OK” to confirm you are a Healthcare Professional.
Healthcare Professionals
Affinity™ CP
Centrifugal Blood Pump
The Affinity™ CP pump is now available with two biocompatible surface options.
The Affinity CP centrifugal blood pump, part number AP40, is a low prime centrifugal pump with smooth cone and low-profile fins that gently handles blood, resulting in low hemolysis. It is designed for use with Bio-Console™ pump speed controllers with a new, high-efficiency remote drive, 560A, providing the durability you've come to expect from Medtronic.
Available with a choice of biocompatible surface options; Cortiva™ BioActive Surface with non-leaching End Point Attached Heparin, or Balance™ Biosurface, a hydrophilic biosurface without heparin.
The Affinity CP centrifugal blood pump may be used with the Stöckert™ and Sorin™ centrifugal pump systems or the Sarns™ and Terumo™ centrifugal systems by attaching the Affinity CP adapter. The adapter may not be available in your country. For more information, contact your local sales representative.
Balance Biosurface*
This addition to the Affinity family is part of the Medtronic commitment to providing more options for patients undergoing cardiopulmonary bypass.
For more detailed information, download our product brochure.
CAUTION
Follow a strict anticoagulation protocol and routinely monitor anticoagulation during all procedures.
Centrifugal Blood Pumps and Probes |
||
---|---|---|
Description |
Order Number |
# of Units |
AP40 |
Affinity CP 3/8" inlet/outlet, 40 mL priming volume |
4 per case |
95244 |
DP38 Adult Bio-Probe™ Flow Probe, 3/8" |
12 per case |
95134 |
DP38P Pediatric Bio-Probe Flow Probe, 1/4" |
12 per case |
With Cortiva BioActive Surface |
||
---|---|---|
Description |
Order Number |
# of Units |
CBAP40 |
Affinity CP Centrifugal Blood Pump with Cortiva BioActive Surface |
4 per case |
With Balance Biosurface |
||
---|---|---|
Description |
Order Number |
# of Units |
BBAP40 |
Affinity CP Centrifugal Blood Pump with Balance Biosurface |
4 per case |
Affinity CP Adapter Ordering Information |
||
---|---|---|
Description |
Order Number |
# of Units |
AP40AST |
Affinity CP Adapter |
1 per box |
Bio-Console™ Ordering Information |
|
---|---|
560BCS1 |
Bio-Console 560BCS1 Speed Controller |
TX50 |
Flow Transducer |
DP38 |
Flow Transducer Disposable |
ACS500 |
System AutoClamp Kit |
BD38 |
Bubble Detector Cable — Adult |
LS100 |
Level Sensor |
LST |
Level Sensor Tape |
HCS150 |
Hand Crank Stand |
560A |
External Drive Motor for Affinity™ CP |
HC150A |
Emergency Handcrank for Affinity™ CP |
Balance is a registered trademark of Medtronic. Technology licensed under agreement from BioInteractions, Limited, United Kingdom.
See chart below.
Comparison between Balance-coated and uncoated in vitro bench test circuits of percentage of platelets that are activated with adenosine diphosphate (ADP @20 μM) in circulating heparinized human blood over time. Error bars represent standard deviation. († indicates p < 0.05)
CAUTION: Product coated with Balance biosurface is intended for single use only. Resterilization may adversely affect the Balance biosurface.