The RapidVac™ smoke evacuator works with any electrosurgical generator to evacuate electrosurgical smoke and laser plume.
The RapidVac™ ULPA filter is a disposable ULPA filter for the cleansing of surgical smoke using a RapidVac Smoke Evacuator.
The RapidVac™ remote switch activator synchronizes the RapidVac™ smoke evacuator system to any generator by recognizing the cut and coag current that is being emitted.
The RapidVac™ smoke evacuator footswitch is used to activate the RapidVac™ smoke evacuator.
RapidVac™ smoke tubing enables controlled smoke evacuation when connected to the RapidVac™ ULPA filter.
The RapidVac™ smoke wand is used in the evacuation of laser plume.
The Fluid Trap is designed to capture fluid that is inadvertently suctioned by the RapidVac smoke capture device. This helps prevent fluid from reaching the filter. The RVFT10 connects to the 7/8” port on the RapidVac™ ULPA Filter.
The RapidVac™ smoke evacuator system is designed to capture and filter surgical smoke to remove aerosols, particulates, and some other potentially hazardous byproducts from a surgical site during electrosurgery procedures.
The RapidVac™ smoke evacuator system teams up with the ForceTriad™ energy platform and the Force FX™ generators. Optional accessories are available to enable other electrosurgical generators to synchronize with the RapidVac™ system.