| Item number | Description |
|---|---|
| CEDTG200 | DiamondTemp™ RF generator |
| CEDTC100 | DiamondTemp™ catheter-to-RFG cable |
| CEDTGC100 | DiamondTemp™ GenConnect cable |
| CEDTEGM100 | DiamondTemp™ EGM cable |
| CEDTP100 | DiamondTemp™ irrigation pump |
| CEDTTS100 | DiamondTemp™ irrigation tubing set |
RF ablation generators
DiamondTemp™ RF generator
<p>The DiamondTemp™ generator, pump, and accessories supply energy and temperature control to the DiamondTemp™ cathether during cardiac ablation procedures. </p>
Product details
DiamondTemp™ generator connection box E
The Medtronic DiamondTemp™ generator connection box E is a signal filtration device used to connect the DiamondTemp™ ablation catheter and DiamondTemp™ RF generator to Abbott EnSite™* cardiac mapping and navigation systems configured to use NavX navigation technology (ex. EnSite X). The box transmits intracardiac signals from the catheter electrodes to a compatible 3-D mapping and navigation system without any signal distortion or interference by the generator.
DiamondTemp™ RF generator
The DiamondTemp™ ablation generator operates in temperature control mode. The desired catheter tip-to-tissue temperature is selected by the user. Thermocouples in the catheter tip provide temperature feedback and the generator automatically adjusts the power output to maintain the desired tip-to-tissue temperature.
DiamondTemp™ catheter-to-RFG cable
The DiamondTemp™ catheter-to-RF generator cable provides the connection between the DiamondTemp™ generator and DiamondTemp™ catheter. The cable distal end has a 19-pin connector that connects to the DiamondTemp™ catheter. The cable proximal end has a 26-pin connector that connects with the RF generator.
DiamondTemp™ GenConnect cable
The GenConnect cable is used to connect the DiamondTemp™ catheter to the RF generator when a GenConnect device is used. The GenConnect cable distal end has a 26-pin female connector that connects to the catheter cable and a proximal end with a 26-pin male connector that connects with the generator
DiamondTemp™ EGM cable
The DiamondTemp™ EGM cable connects the RF generator to a hospital's compatible EP recording system. This feature is used with the DiamondTemp™ ablation catheters. The DiamondTemp™ EGM cable is supplied separately for use with the DiamondTemp™ RF generator. The EGM cable should be used only with the DiamondTemp™ ablation system. (The EGM cable can also be used to connect the DiamondTemp™ generator connection box E to the EnSite™* amplifier.)
DiamondTemp™ irrigation pump
The DiamondTemp™ irrigation pump delivers saline to the DiamondTemp™ ablation catheter when used in conjunction with the DiamondTemp™ tubing. The irrigation pump has a touch screen display and flow control button that controls a two-flow-rate feature for easy selection of the appropriate irrigation flow rate. The irrigation pump communicates with the DiamondTemp™ generator and may be operated either under control of the generator or independently. The irrigation pump is intended for use only with the DiamondTemp™ tubing set.
DiamondTemp™ irrigation tubing set
The DiamondTemp™ irrigation tubing set is designed for use with the DiamondTemp™ ablation system. The tubing is an accessory to the DiamondTemp™ irrigation pump and is supplied separately. The tubing delivers saline (0.9%) hHeparin 1 IU/mL to the catheter when used with the irrigation pump. The delivery action is based on a peristaltic mechanism employing rollers and mechanical fingers that push fluid through the tubing. The tubing is provided sterile and is for single use only.