Bedside patient monitoring

Nellcor™ bedside SpO₂ patient monitor with home care and sleep study modes

<p>The Nellcor™ bedside SpO₂ patient monitor with home care and sleep study mode provides at-a-glance access to real-time patient respiratory status information.</p>

Ordering information
Contact a representative

Features

  • Displays plethysmographic waveforms, pulse amplitude, and real-time SpO2 and pulse rate data
  • 96-hour trend memory with data captured every four seconds for quick review of changes in patient status
  • Includes SatSeconds™ alarm management, a clinician-controlled feature that has been proven to reduce nuisance alarms1
  • Password protected home care and sleep study modes
  • The device meets IEC 60601-1-11 for home health equipment to promote the safe and effective use of the monitor by lay users in the non-hospital setting

Specifications

Performance — measurement range
SpO2 1% to 100%
Pulse rate 20 to 250 beats per minute (bpm)
Pulse amplitude 0.03% to 20%
Measurement accuracy — saturation
Adult 70% to 100% ± 2 digits
Adult and neonate low sat 60% to 80% ± 3 digits
Neonate 70% to 100% ± 2 digits
Low perfusion 70% to 100% ± 2 digits
Adult and neonate with motion 70% to 100% ± 3 digits
Pulse rate
Adult and neonate 20 to 250 bpm ± 3 digits
Low perfusion 20 to 250 bpm ± 3 digits
Adult and neonate with motion 20 to 250 bpm ± 5 digits
Electrical — instrument
Power requirements 100 to 240 VAC, 50/60 Hz, 45 VA
Fuse rating Fast-acting 2A 32VAC/DC,
Fast-acting 500mA 32VAC/50DC
Electrical — battery
Type Lithium ion
Battery capacity Minimum of eight hours using new, fully charged battery with no alarms; optional 16-hour battery available.
Environmental — temperature
Operating conditions 5 C to 40 C (41 F to 104 F)
Transport and storage (in shipping carton) -20 C to 60 C (-4 F to 140 F)
Environmental — humidity
Operating conditions 15% to 93% noncondesending
Transport and storage (in shipping carton) 15% to 93% noncondesending
Environmental — altitude
Operating conditions -170 m to 4,877 m (-557 ft to 16,000 ft)
Transport and storage (in shipping carton) -304 m to 6,096 m (-1,000 ft to 20,000 ft)
Physical characteristics
Weight 1.6 kg (3.5 lbs including battery)
Size 82 H × 255 W × 155 D (mm),
(3.23 H ×10.04 W × 6.10 D (in))
Equipment classifications
Type of protection against electric shock Class 2 (internally powered)
Degree of protection against electric shock Type BF — applied part
Mode of operation Continuous
Liquid ingress IP 22
Output
Trend data download via wired or USB for archiving or data analysis
Display/indicators
Pulse amplitude indicator (eight segments)
Visual indicators Pulse search, audible alarms silenced or off, interference indicator, battery charging, and SatSeconds alarm management clock, pleth wave form
Alarms
SatSeconds alarm management
Audible and visual alarms for high/low saturation and pulse rate, low battery, sensor off, and sensor disconnect
Categories Patient status and system status
Priorities Low, medium and high
Notification Audible and visual
Setting Default, institutional, and last setting
Alarm system delay < 10 seconds
Optional accessories
  • 16-hour battery
  • Adapter plate
  • GCX wall mount arm and channel
  • GCX roll stand
  • Carrying case
Available modes
  • Standard — hospital, hospital‑type facilities, and intra‑hospital transport
  • Home care — simplified monitoring for use in the home by caregivers
  • Sleep study — muted audible and visual cues to aid sleep studies
Connectivity
  • Supports wired and USB trend data export to an external personal computer for archiving or data analysis
  • Nurse call capability
Simple setup and maintenance
The Nellcor™ bedside SpO2 patient monitoring system is RoHs compliant, and enables hospital staff to set institutional defaults, replace the battery, perform diagnostics to troubleshoot performance issues, and perform on‑site maintenance on the monitor.

Ordering information

Item number Description Units per box
PM100N Monitor 1
PM100N-HC Monitoring system — includues monitor, 8-hour battery, homecare kit and power cord 1
PM100N-MAXN Monitoring system —  includes monitor, 8-hour battery, Nellcor™ SPO2 adhesive sensors and power cord 1
PT00155475 16-hour battery 1

Resources

Similar products

The Nellcor™ pulse oximetry monitoring system should not be used as the sole basis for diagnosis or therapy and is intended only as an adjunct in patient assessment.

  1. Brostowicz HM, Khodayar Rais-Bahrami K. Oxygen saturation monitoring in the neonatal intensive care unit: evaluation of a new alarm management. In: Program and abstracts of the American Academy of Pediatrics National Conference & Exhibition; October 17–20, 2009; Washington, D.C.