Support catheters
<p>The Phenom™ Plus support catheter is a comprehensive device deployment solution with distal access for neurointerventional procedures. </p>
Phenom™ catheters are intended for introduction of interventional devices or diagnostic agents into the neuro, peripheral, and coronary vasculatures.
Potential complications of the devices and the endovascular procedure include or are synonymous with, but may not be limited to the following:
Consult instructions for use for other therapy devices and medications for additional potential complication information. If a serious incident related to the device occurs, contact your Medtronic representative and the competent authority in your respective country/region.
There are no known contraindications.
This device is intended for single use only. Discard after one procedure. Reuse and/or re-sterilization can potentially result in compromised device performance and cross contamination.
The Phenom™ catheter should be manipulated under fluoroscopy only. Do not attempt to move the catheter without observing the resultant tip response.
Never advance or withdraw an intraluminal device against resistance until the cause of resistance is determined by fluoroscopy. If the cause cannot be determined, withdraw the catheter. Movement of the catheter against resistance may result in damage to the catheter, or the vessel.
The infusion pressure should not exceed the listed pressure as indicated in the flow rate table (listed in the indications for use).
Nickel (CAS 7440-02-0) is present in the Phenom™ catheter and may cause sensitization or an allergic reaction.
The catheter has not been tested for use with automated high-pressure contrast injection equipment. Do not use this equipment with the device because it may damage the device.
Visually inspect all sterile barrier systems, that are labeled as sterile, immediately prior to use. Do not use the device if breaches in sterile barrier system integrity are evident.
Do not use catheters that are damaged in any way. Damaged catheters may break or rupture causing vessel damage or tip detachment during the procedure.
Shaping mandrel is not for in-vivo use.
Indications, contraindications, warnings, and instructions for use can be found in the product labeling supplied with each device or viewed at www.medtronic.com/manuals
US-NNP-2400087 (v1.0)
The Phenom™ Plus support catheter offers:
Avigo™ 0.014 hydrophilic guidewire used to aid in the placement of catheters in the peripheral and cerebral vasculature during stroke procedures.
The Axium MicroFX™ coil is designed to reduce blood flow across aneurysms and offers an alternative to bare coils in treating intracranial aneurysms.
The Axium™ Prime frame coil has a unique hybrid loop configuration and is a stable first coil option for various aneurysm shapes and neck sizes.
The Axium™ QC coil comes in 83 sizes and has a high packing volume to treat intracranial aneurysms.
Mirage™ hydrophilic guidewire used to aid in the placement of catheters in the peripheral and cerebral vasculature during stroke procedures.
Onyx™ 12, 18, 34 LES for adjunct to surgery to subacute/chronic subdural hematoma. Onyx™ 18, 34 LES for presurgical embolization of bAVMs.
Pipeline™ Flex with Shield Technology™ is a third-generation embolization device designed for placement in a parent vessel across the neck of an intracranial aneurysm (IA).
The Solitaire™ X revascularization device is designed for effective clot retrieval during thrombectomies for acute ischemic stroke (AIS) patients.
X-Pedion™ hydrophilic guidewire used to aid in the placement of catheters in the peripheral and cerebral vasculature during stroke procedures.
The APRO®* 55 intermediate catheter has a hydrophilic coated distal segment to aid navigation through vasculature during neurovascular procedures.
The Navien™ intracranial support catheter is a single lumen, flexible, variable stiffness composite catheter. The catheter shaft has a hydrophilic coating to reduce friction during use.