| Item number | Cable length | Cable diameter | Weight | Units per box |
|---|---|---|---|---|
| PMC10N-SF | 305 cm ± 5 cm | 4.80 ± 0.2 mm (0.189 ± 0.008 in) | 160 ± 16 g (0.35 ± 0.03 lbs) | 1 |
Pulse oximetry OEM solutions
Nellcor™ OxiCable
Pulse oximetry OEM solutions
Nellcor™ OxiCable
The Nellcor™ OxiCable is flexible, durable, and engineered for simplified workflow.
Description
Plug-and-care
With easy software integration, OEM partners can now provide Nellcor™ pulse oximetry by simply connecting the Nellcor™ OxiCable to enabled multiparameter monitors. This external solution is designed for new and existing OEM partner platforms.
Features
Nellcor™ OxiCable easily integrates into smaller and mobile monitoring platforms and works with the full array of Nellcor™ pulse oximetry sensors. Through rigorous durability testing, the ruggedized Nellcor™ OxiCable is designed to perform through mechanical shock, vibration, drops, and impacts.
The plug-and-care cable is engineered to connect to enabled monitoring platforms, offering SpO2 intelligence for your patients throughout the care continuum:
- Eight-bit waveform (plethysmograph) pulse amplitude, enabling the “blip” bar to indicate pulse strength
- Alarm notification
- Field upgradability through software updates — without hardware changes
- Optional feature — pulse strength reporting (percent modulation of infrared input)
Specifications
| Power specifications | ||
|---|---|---|
| Voltage input | 3.2V to 3.6V DC (3.3V recommended for best performance) | |
| Power consumption (average/maximum) | 100 mw maximum | |
| Recommended maximum input voltage ripple | 25 mVp-p | |
| Enviornmental conditions | ||
| Temperature | 0 C to 40 C (32 F to 104 F) | 40 C to 70 C (-40 F to 158 F) |
| Atmospheric pressure | -500 m to 4000 m (1075 hPa to 616 hPa) | -500 m to 5572 m (1075 hPa to 500 hPa) |
| Relative humidity | 5% to 95% RH (noncondensing) | 5% to 95% RH (noncondensing) |
| Material specifications | ||
| Blue overmold material | Thermoplastic polyurethane material (TPU) | |
| Cable outer jacket | TPU | |
| Molded host connector material | Plastic | |
| Ingress protection | ||
| IP47 (without attached sensor) | ||
Ordering information
Similar products
-
GE ApexPro™* CH and FH SpO₂ Nellcor™ cableThe GE ApexPro™* CH/FH SpO₂ Nellcor™ cables allow for Nellcor™ pulse oximetry to connect to GE ApexPro™* CH/FH transmitters. -
GE CARESCAPE™* SpO₂ parameterThe GE CARESCAPE™* SpO₂ parameter provides Nellcor™ pulse oximetry in an easy plug-in external interface with low power design.
-
Nellcor™ Nell series pulse oximetry PCBA with OxiMax™ technologyNellcor™ Nell series PCBAs deliver the performance of Nellcor™ OxiMax™ SpO₂ and pulse rate technology with the SatSeconds alarm management system. -
Nellcor™ low-power pulse oximetry PCBAThe Nellcor™ low-power pulse oximetry printed circuit board assembly offers small size and low power SpO₂ technology for monitoring applications.
-
Nellcor™ multi-functional respiratory PCBA OEM platformNellcor™ multi-functional respiratory (MFR) PCBA platform offers Nellcor™ SpO₂, pulse rate, and respiration rate technology in a single-sensor design.
The Nellcor™ pulse oximetry monitoring system should not be used as the sole basis for diagnosis or therapy and is intended only as an adjunct in patient assessment.