Vårdpersonal
NC Sprinter RX
Noncompliant Balloon Dilatation Catheter
Du har precis klickat på en länk som tar dig till en annan webbplats. Om du fortsätter kommer du att lämna denna webbplats och gå till en webbplats som drivs av någon annan.
Medtronic Sverige varken granskar eller kontrollerar innehållet på den andra webbplatsen och tar inget ansvar för eventuella affärstransaktioner som du utför där. Din användning av den andra webbplatsen är föremål för användarvillkoren och sekretesspolicyn på den webbplatsen.
Det är möjligt att vissa produkter på den andra platsen inte är godkända i Sverige.
Den här webbplatsen använder cookies för att lagra information på din dator. Vi använder cookies för att vår webbplats ska fungera och för att ge dig en bättre upplevelse av webbplatsen. Genom att använda webbplatsen godkänner du placeringen av dessa cookies. Du kan när som helst ändra inställningarna för cookies. Läs vår sekretesspolicy för att lära dig mer.
Din webbläsare är inaktuell
Med en uppdaterad webbläsare kommer du att få en bättre upplevelse på Medtronic webbplats. Uppdatera webbläsaren nu.
Välkommen till vår information för hälso- och sjukvårdspersonal.
Här hittar du produktinformation och annan info framtagen för dig som arbetar inom vården.
Arbetar du inom ett vårdyrke?
Vårdpersonal
Noncompliant Balloon Dilatation Catheter
The NC Sprinter® RX Noncompliant Rapid Exchange Balloon Dilatation Catheter combines tried and true Sprinter technology with the high-pressure capability and controlled expansion of a noncompliant balloon.
How the NC Sprinter RX Works
Stent implantation often follows balloon angioplasty. Once the stent is implanted, post stent deployment as assessed by IVUS or fluoroscopy may be completed to ensure adequate stent expansion and apposition against the arterial wall.1
The NC Sprinter RX noncompliant rapid exchange balloon dilatation catheter combines tried and true Sprinter technology with the high-pressure capacity and controlled expansion of a noncompliant balloon.2
Specifications
Catheter length | 138 cm |
Lesion entry profile (in.) | 0.016 |
Tip length (mm)
|
3.5 mm 4.5 mm |
Balloon material | Soft Fulcrum Plus |
Coating | Selective DuraTrac |
Gold-swaged marker bands | Double |
Nominal pressure | 10 atm |
Rated burst pressure | 18 atm |
MiniWrap folds
|
3 folds 5 folds |
Shaft dimensions for 2.0 – 3.75 mm
|
1.9 F 2.4 F / 2.6 F |
Shaft dimensions for 4.00 – 5.00 mm
|
1.9 F 3.0 F |
MGCID (in.) |
|
Diameters (mm) |
2.00 – 5.00 |
Lengths (mm) | 6, 9, 12, 15, 21, 27 |
Balloon Diameter (mm) | Crossing Profile OD (in) |
---|---|
2.00 | 0.024 |
2.25 | 0.024 |
2.50 | 0.025 |
2.75 | 0.025 |
3.00 | 0.026 |
3.25 | 0.027 |
3.50 | 0.027 |
3.75 | 0.028 |
4.00 | 0.029 |
4.50 | 0.030 |
5.00 | 0.032 |
Pressure (atm) | Balloon Diameter (mm) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2.00 | 2.25 | 2.50 | 2.75 | 3.00 | 3.25 | 3.50 | 3.75 | 4.00 | 4.50 | 5.00 | |
8 | 1.98 | 2.17 | 2.45 | 2.70 | 2.97 | 3.09 | 3.36 | 3.62 | 3.87 | 4.27 | 4.75 |
9 | 2.00 | 2.20 | 2.49 | 2.74 | 3.01 | 3.15 | 3.42 | 3.68 | 3.93 | 4.34 | 4.84 |
10 | 2.02 | 2.23 | 2.51 | 2.77 | 3.04 | 3.18 | 3.45 | 3.72 | 3.97 | 4.39 | 4.91 |
11 | 2.03 | 2.24 | 2.53 | 2.80 | 3.07 | 3.22 | 3.49 | 3.76 | 4.01 | 4.44 | 4.97 |
12 | 2.05 | 2.26 | 2.55 | 2.82 | 3.10 | 3.25 | 3.52 | 3.79 | 4.05 | 4.48 | 5.01 |
13 | 2.07 | 2.28 | 2.57 | 2.84 | 3.13 | 3.28 | 3.55 | 3.82 | 4.08 | 4.51 | 5.06 |
14 | 2.08 | 2.30 | 2.58 | 2.87 | 3.15 | 3.31 | 3.58 | 3.85 | 4.11 | 4.55 | 5.10 |
15 | 2.10 | 2.32 | 2.60 | 2.89 | 3.18 | 3.33 | 3.61 | 3.88 | 4.15 | 4.58 | 5.14 |
16 | 2.12 | 2.33 | 2.62 | 2.91 | 3.20 | 3.36 | 3.63 | 3.90 | 4.18 | 4.61 | 5.18 |
17 | 2.13 | 2.36 | 2.63 | 2.93 | 3.23 | 3.39 | 3.65 | 3.93 | 4.22 | 4.65 | 5.22 |
18 | 2.15 | 2.38 | 2.65 | 2.95 | 3.26 | 3.41 | 3.68 | 3.96 | 4.25 | 4.68 | 5.26 |
19 | 2.17 | 2.40 | 2.66 | 2.98 | 3.29 | 3.44 | 3.71 | 3.99 | 4.29 | 4.72 | 5.30 |
20 | 2.19 | 2.42 | 2.68 | 3.00 | - | 3.47 | 3.73 | 4.02 | - | 4.76 | - |
21 | 2.21 | 2.44 | 2.70 | 3.03 | - | 3.50 | 3.77 | 4.05 | - | 4.80 | - |
22 | 2.23 | 2.46 | 2.72 | 3.05 | - | 3.53 | - | 4.08 | - | 4.84 | - |
Nominal pressure | |||||||||||
Rated burst pressure |
Test data on file with Medtronic, Inc.
* Rated burst pressure: the maximum pressure to which a balloon is designed to be inflated (95% confidence that 99.9% will not fail below rated burst pressure). DO NOT EXCEED.
Nominal pressure: the pressure at which the balloon reaches its labeled diameter.
Ordering Information
Balloon Diameter (mm) | Balloon Length (mm) | Crossing Profile O.D. mm (in.) | |||||
---|---|---|---|---|---|---|---|
6 | 9 | 12 | 15 | 21 | 27 | ||
2.00 | NCSP2006X | NCSP2009X | NCSP2012X | NCSP2015X | NCSP2021X | – | 0.60 (0.024) |
2.25 | NCSP22506X | – | NCSP22512X | – | NCSP22521X | – | 0.62 (0.024) |
2.50 | NCSP2506X | NCSP2509X | NCSP2512X | NCSP2515X | NCSP2521X | NCSP2527X | 0.63 (0.025) |
2.75 | NCSP27506X | – | NCSP27512X | NCSP27515X | NCSP27521X | – | 0.65 (0.025) |
3.00 | NCSP3006X | NCSP3009X | NCSP3012X | NCSP3015X | NCSP3021X | NCSP3027X | 0.66 (0.026) |
3.25 | NCSP32506X | NCSP32509X | NCSP32512X | NCSP32515X | NCSP32521X | – | 0.68 (0.027) |
3.50 | NCSP3506X | NCSP3509X | NCSP3512X | NCSP3515X | NCSP3521X | NCSP3527X | 0.70 (0.027) |
3.75 | NCSP37506X | NCSP37509X | NCSP37512X | NCSP37515X | NCSP37521X | – | 0.71 (0.028) |
4.00 | NCSP4006X | NCSP4009X | NCSP4012X | NCSP4015X | NCSP4021X | NCSP4027X | 0.73 (0.029) |
4.50 | – | – | – | NCSP4515X | NCSP4521X | – | 0.76 (0.030) |
5.00 | – | – | – | NCSP5015X | – | – | 0.80 (0.032) |
Balloon Diameter (mm) | Balloon Length (mm) | Crossing Profile O.D. mm (in.) | |||||
---|---|---|---|---|---|---|---|
6 | 9 | 12 | 15 | 21 | 27 | ||
2.00 | NCSP2006X | NCSP2009X | NCSP2012X | NCSP2015X | NCSP2021X | – | 0.60 (0.024) |
2.25 | NCSP22506X | – | NCSP22512X | – | NCSP22521X | – | 0.62 (0.024) |
2.50 | NCSP2506X | NCSP2509X | NCSP2512X | NCSP2515X | NCSP2521X | NCSP2527X | 0.63 (0.025) |
2.75 | NCSP27506X | – | NCSP27512X | NCSP27515X | NCSP27521X | – | 0.65 (0.025) |
3.00 | NCSP3006X | NCSP3009X | NCSP3012X | NCSP3015X | NCSP3021X | NCSP3027X | 0.66 (0.026) |
3.25 | NCSP32506X | NCSP32509X | NCSP32512X | NCSP32515X | NCSP32521X | – | 0.68 (0.027) |
3.50 | NCSP3506X | NCSP3509X | NCSP3512X | NCSP3515X | NCSP3521X | NCSP3527X | 0.70 (0.027) |
3.75 | NCSP37506X | NCSP37509X | NCSP37512X | NCSP37515X | NCSP37521X | – | 0.71 (0.028) |
4.00 | NCSP4006X | NCSP4009X | NCSP4012X | NCSP4015X | NCSP4021X | NCSP4027X | 0.73 (0.029) |
4.50 | – | – | – | NCSP4515X | NCSP4521X | – | 0.76 (0.030) |
5.00 | – | – | – | NCSP5015X | – | – | 0.80 (0.032) |
Brodie BR. Adjunctive balloon postdilatation after stent deployment: is it still necessary with drug-eluting stents? J Interv Cardiol. 2006;19:43-50.
NC Sprinter balloon models 2.25 mm to 5.0 mm are indicated for the post-delivery expansion of balloon expandable stents.
Test results based on distal balloon shoulder. Test data on file at Medtronic, Inc. Bench test results may not be indicative of clinical performance.
Test data on file at Medtronic, Inc. Bench test results may not be indicative of clinical performance.